Specialty Edges

Modified 3cm Ogee Edge Created with 2cm bit

The Modified 3cm Ogee Edge Created with 2cm bit is an adaptation of the classic S-shaped Ogee profile specifically cut onto a standard 3-centimeter (3cm) thick slab. The use of a 2-centimeter bit—which is smaller than the full thickness of the stone—means the characteristic deep, sweeping S-curve of a traditional Ogee is scaled down or made shallower. This results in a profile that retains the elegance and detail of the Ogee, but with a slimmer and less bulky visual presence on the countertop's edge, offering a slightly more contemporary and restrained take on the traditional, decorative style.

Laminated 2cm Specialty Large Modified Ogee Edge

The Laminated 2cm Specialty Large Modified Ogee Edge is a premium profile created by laminating a 2cm stone slab to double its thickness (e.g., to 4cm). This depth allows for a Specialty Large Modified Ogee cut, which features a custom, deep, and sweeping S-curve. The result is a highly decorative, substantial, and opulent edge.

Offset Surface Lamination with 1cm Top & Bottom Radius

The Offset Surface Lamination with 1cm Top & Bottom Radius is a distinctive, thickened edge created by laminating a secondary piece of stone that is offset (set back slightly) from the top surface edge. The resulting profile features a visible seam or step-down near the top, leading to a much thicker edge. Both the top and bottom of this substantial edge are finished with a smooth, large 1-centimeter radius (a gentle, rounded curve). This edge offers a modern, architectural look with high durability due to its thickness, often resembling a stepped or cantilevered design.

Modified Ogee Edge with Offset Lamination

The Modified Ogee Edge with Offset Lamination is a complex, high-end profile that creates a substantial and stepped appearance. It uses a lamination technique to double the stone's thickness (e.g., from 2cm to 4cm), but the added strip is offset or set back from the main top slab, which results in a clear visual break or step. The thickened section is then cut with a Modified Ogee—a scaled or customized version of the traditional S-curve profile. This combination results in a dramatic, architectural edge that offers the formality and elegance of the Ogee, layered on top of a distinctive, stepped profile.

CALL US NOW